This Simplifly SiK Telemetry Radio is a small, light and inexpensive open-source radio platform that typically allows ranges of better than 700m “out of the box” (the range can be extended to several kilometers with the use of a patch antenna on the ground). This radio is plug-n-play all Pixhawk Standard and other Flight Controller, providing the easiest ways to setup a telemetry connection between your Autopilot and a ground station.

It uses open-source firmware which has been specially designed to work well with MAVLink packets and to be integrated with the Mission Planner, Ardupilot, Q-Ground Control, PX4 Autopilot.

• 100mW maximum output power (adjustable) -117 dBm receive sensitivity.
• RP-SMA connector.
• 2-way full-duplex communication through adaptive TDM UART interface.
• MAVLink protocol framing.
• Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle.
• Error correction corrects up to 25% of bit errors. Open-source SIK firmware.
• Configurable through Mission Planner & APM Planner.

Features:

1. Open-source SiK firmware.
2. The easiest way to connect your Autopilot and Ground Station.
3. Interchangeable air and ground radio.
4. Type-C port for lightning-fast connectivity.
5. Plug-n-play for Pixhawk Standard Flight Controllers.
6. 6-position JST-GH connector.

Package Includes:

2 x Radio modules with antennas

1 x USB type-C to USB-A cable

1 x USB type-C to USB type-C cable

1 x Android OTG adapter cable

1 x JST-GH-6P to JST-GH-6P cable

1 x JST-GH-6P to Molex DF13 6P cable